OP1100

Product Specifications
Downloads
Product Features

Specifications

Optical Power Meter	Input power range: +6dBm..-40dBm Wavelength Range: 830nm..1650nm
Optical Receiver	80µm InGaAs Detector >2MHz Bandwidth Logartihmic amplifier output 0...4.2V
Discontinuity Detection	Event duration: >0.5 µsec to 500 µsec Event amplitude: >= 0.5dB Sampling interval: 0.2µsec Event trace: 256,000 samples
Data Interface	USB 1.1, USB 2.0 compatible data rate and interconnect
Operating Temperature Range	0C to 50C (32F to 122F)
Optical Interface	Fixed FC (others upon resquest)
Power Supply (order country specific)	US Standard or Euro Standard
Mechanical Dimensions	Standard 19” rack, 2U (16.8 x 3.8 x 10 inch

Downloads

[PDF] Product Datasheet for OP1100

Features

This test solution provides a method for testing a broad variety of passive or active fiber optic components for susceptibility to discontinuities (signal dropout, transient output or transmittance fluctuations) during application of an external stimulus, such as temperature, vibration or physical shock.

Insertion Loss Measurement

Singlemode/Multimode capable
Input power range of +6dBm to -40dBm
Selectable dropout detection range of 1 µsec, 10µsec, or 50µsec
Selectable loss threshold of 0.5dB to 3dB
Bundled OPLTrans application that records data directly into EXCEL (microsoft) or just spreadsheet
USB Interface for seamless remote control
Support of most common connector options (FC, ST, SC, and others)

Content on this page requires a newer version of Adobe Flash Player.

Content on this page requires a newer version of Adobe Flash Player.