|
OP280
The OP280 is used to identify fiber routing on ribbon fibers or to
locate breaks in ribbon fiber. Each of the 12 fibers is illuminated
with a bright, red laser.
|
|
The OP280 is used to identify fiber
routing on ribbon fibers or to locate breaks in ribbon fiber. Each
of the 12 fibers is illuminated with a bright, red laser. The OP280 is pre-programmed with various sequences such as automatic or individual
scanning of each fiber, reverse order, or following the various connection types.
User define patterns can be programmed via USB data port which also can be used
to charge the internal battery. For a fast charge a standard 5VDC connector is
available.
- 12 Individual super bright red lasers, one per fiber.
- Use for fault location up to a few
hundred meters
- Internal rechargeable battery
- USB or 5VDC chargeable
- Programmable patterns for the various
connection types
Verify wiring of ribbon fiber connectors, hybrid cables, and
distribution boxes quickly and conveniently with the OP280 MT-VFL
| OP280-MT-VFL |
| Laser Sources |
12 |
| Optical Interface |
MTP/MPO APC male or female |
| Internal Fiber |
SMF28 |
| Laser Wavelength |
635nm |
| Optical Output Power |
0.50 mW into 9/125 |
| Data Interface |
USB 1.0 or later |
| Mechanical Dimension |
8.5” x 3.5” x 1.2” |
| Power Supply |
Internal Battery, charge with
5VDC or USB port |
|
