Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

PRODUCTS

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

OP710ANX

Multichannel optical power meter with internal individual power meter modules for concurrent data acquisition with higher data acquisition rate.

 

 

 

 

 

  • Product Specifications
  • Downloads
  • Product Features

 

Specifications

Optical Power Meter
Channels 2 .. 24 units are stack able for more channels
Measurement Range +6 dBm .. -80 dBm
Wavelength Range 830nm ..1700nm (InGaAs Detector)
Selectable Wavelength 850/1300/1310/1480/1550/1625nm others upon request
Measurement Resolution 0.01dBm (absolute)
0.001dB (relative)
Measurement Resolution (Display) 0.1dBm / 0.01dB / 0.001dB
Measurement Linearity, Relative Accuracy 0.05dB
Optical Interface interchangeable adapter for all common connector types
Data Interface USB 1.1/2.0 or later
Operating Range 0C .. 50C (32F .. 122F)
Mechanical Dimension 2U x 19" rack (16.8 x 3.8 x 10")
Power Supply (90..140VAC 60Hz, 200...250VAC 50Hz

 

Downloads

  • [PDF] Product Data sheet for OP710 ANX.
  • [EXE] OPL7 Data Logging Application for one or multiple instruments.
  • [PDF] Product Manual OP710.

 

 

Features

The OP710ANX incorporates individual channels of optical to electrical converters and resembles an easy to implement multichannel O/E converter for applications such as detecting and monitoring of optical signals.

The OP710ANX is available starting at 8 channels up to 24 channels and with InGaAs detectors for wavelengths between 800nm to 1700nm or Silicon detectors for wavelengths between 400nm to 1000nm.

High bandwidth multichannel O/E Converter

With a bandwidth of minimal 10MHz this O/E Converter finds many applications on high speed monitoring of optical signals.

Two Gain Settings

The second stage gain can be switched from 1X to 10X via the front panel or USB command for each channel individually.

Covenient 19” Rack Mount solution

With the optical inputs in front and the electrical outputs in the back this is an ideal configuration for rack mount test solutions where the electrical signal is processed further with third party AD converter modules.

 

 

OptoTest® is a registered trademark of OptoTest Corporation of California . © 2003-2009 OptoTest Corporation. All rights reserved.
805.987.1700 • sales@optotest.comPrivacy Statement