Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
PRODUCTS

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

OP710 IN

Multichannel optical power meter with internal individual power meter modules for concurrent data acquisition with higher data acquisition rate.

 

 

 

 

 

  • Product Specifications
  • Downloads
  • Product Features

 

Specifications

Optical Power Meter
Channels 2 .. 24 units are stack able for more channels
Measurement Range +6 dBm .. -80 dBm
Wavelength Range 830nm ..1700nm (InGaAs Detector)
Selectable Wavelength 850/1300/1310/1480/1550/1625nm others upon request
Measurement Resolution 0.01dBm (absolute)
0.001dB (relative)
Measurement Resolution (Display) 0.1dBm / 0.01dB / 0.001dB
Measurement Linearity, Relative Accuracy 0.05dB
Optical Interface interchangeable adapter for all common connector types
Data Interface USB 1.1/2.0 or later
Operating Range 0C .. 50C (32F .. 122F)
Mechanical Dimension 2U x 19" rack (16.8 x 3.8 x 10")
Power Supply (90..140VAC 60Hz, 200...250VAC 50Hz

 

Downloads

  • [PDF] Product Data sheet for OP710 IN.
  • [EXE] OPL7 Data Logging Application for one or multiple instruments.
  • [PDF] Product Manual OP710

 

Features

The OP710 offers an economical approach for optical power measurement applications where multiple channels are needed.
Unlike other systems this instrument is built up with individual power meters allowing for unparalleled simultaneous data acquisition over all channels.

The OP710 is available with 12 or 24 channels and a variety of connector options. With the rack mount option multiple instruments can be combined and configured for even higher channel count.
Because of it's internal modularity thr OP710 can be configured for a mix of detector and adatper options.

 

 
OptoTest® is a registered trademark of OptoTest Corporation of California . © 2003-2009 OptoTest Corporation. All rights reserved.
805.987.1700 • sales@optotest.com • Privacy Statement