OptoTest: Your Test Solution for Fiber Optics

OP710

Multichannel Optical Power Meter

The OP710 offers an economical approach for optical power measurement applications where multiple channels are needed. Unlike other systems this instrument is built up with individual power meters allowing for unparalleled simultaneous data acquisition over all channels.

The OP710 is available with 12 or 24 channels and a variety of connector options. With the rack mount option multiple instruments can be combined and configured for even higher channel count. PDF data sheet

Individual Channels between 4 and 24

Measurement Range +10dBm ... -80dBm (depending on selected detector)

Wavelength Range 830nm ... 1700nm (InGaAs Detectors)
580nm ... 1080 nm (Silicon Detectors)

Selectable Calibration Wavelength Standard: 850/980/1310/1550nm (plus user defined up to 8)

Measurement Resolution Display: 0.01dB (absolute mode) 0.001dB (relative mode)

Measurement Linearity +/- 0.05dB

Data Interface USB 1.1/2.0 or later compatible data rate and interconnect

Operating Temperature 0ºC ... 50ºC (32ºF ... 122ºF)

Mechanical Dimension 2U x 19" Rack Standard (16.8 x 3.8 x 10 inch)

Optical Interface fixed FC/SC/ST or 5/8" adatper (depends on sleected detector)

Power Supply Universal AC Power (110VAC 60Hz, 220VAC 50Hz)

NOTE: Specifications are subject to change, please confirm specific performance characteristics of the
product at the time of ordering.