Product Selection
Return Loss Testing
Optical Sources
MTP Test Solution
Launch Condition Analysis
OP815 MM
Multimode Insertion Loss Test System. Stabilized LED sources with controlled launch.
- Product Specifications
- Product Features
- Downloads
| Optical Power Meter | |
| Measurement Range | +6dBm .. -80dBm |
| Wavelength Range | 830nm ..1700nm (InGaAs Detector) |
| Selectable Wavelength | 850/980/1300/1310/1550/1625nm others upon request |
| Measurement Resolution | 0.01dBm (absolute) 0.001dB (relative) |
| Measurement Resolution (Display) | 0.1dBm / 0.01dB / 0.001dB |
| Measurement Linearity, Relative Accuracy | 0.05dB |
| LED Source | |
| Source Wavelength | 850nm +/- 40nm, 1300nm +/-40nm |
| Typical Output Power | -17dBm (into 62.5 fiber) |
| Output Stability | +/- 0.02dB short-term +/- 0.05dB long term |
| Launch Condition | overfill (CPR>20dB) Encircled flux per IEC |
Insertion Loss (IL) on fiber optical components are measured fast and accurately with the OP815. The insertion loss is measured by utilizing the built in stabilized laser source in combination with the precision optical power meter
Like other OptoTest equipment the OP815 supports the USB interface. The OPL-PRO turnkey application software fully integrates this instrument into the data acquisition process of the high efficient production line.
|
OptoTest® is a registered trademark of OptoTest Corporation of California . © 2003-2009 OptoTest Corporation. All rights reserved. 805.987.1700 • sales@optotest.com • Privacy Statement |
 |
 |