OP831

Product Specifications
Downloads
Product Features

Specifications

Optical Power Meter (external)
Measurement Range	+6dBm .. -80dBm
Optical Power Meter (internal)
Measurement Range	+6dBm .. -60dBm
Wavelength Range	830nm ..1700nm (InGaAs Detector)
Selectable Wavelength	850/1310/1550/1625nm
Measurement Resolution	0.01dBm (absolute) 0.001dB (relative)
Measurement Resolution (Display)	0.1dBm / 0.01dB / 0.001dB
Measurement Linearity, Relative Accuracy	0.05dB
LED Source (OP831-MM)
Source Wavelength	850nm +/- 40nm, 1300nm +/-40nm
Typical Output Power	-17dBm (into 62.5 fiber)
Output Stability	+/- 0.02dB short-term +/- 0.05dB long term
Launch Condition	overfill (CPR>20dB) Encircled flux per IEC
Laser Source (OP831-SM)
Source Wavelength	1310nm +/- 20nm, 1550nm +/-20nm
Output Power	--3dBm (into SM)
Power Stability	+/-0.05dB (12hrs)

Downloads

[PDF] Product Data sheet for OP831.
[EXE] OPL_Pro Demo Application.
[PDF] Programming manual OP831.

Features

This insertion loss test system streamlines and automates the bi-directional insertion loss test.

The insertion loss on both source wavelengths is measured accurately and quickly in both direction. The internal Laser or LED sources are available at most common wavelengths. Dual wavelength operation (1310nm/1550nm) for singlemode or (850nm/1300nm) for multimode fiber makes this a most efficient measuring process. FOr LED sources the controlled launch condition is according to IEC standards.

This system is expandable to multichannel operation by adding a customer specific 2xN optical switch.

Like all other OptoTest equipment the OP831 supports the high speed USB interface for remote control. The OPL-PRO turnkey application software fully integrates this instrument into the data acquisition process of the high efficient production line.

Content on this page requires a newer version of Adobe Flash Player.

Content on this page requires a newer version of Adobe Flash Player.