OP1100 Discontinuity Analyzer

OptoTest_OP1100
Click image to enlarge

The OP1100 Discontinuity Analyzer is an off-the-shelf fiber optic test system that automatically captures, displays and logs short optical power interruptions and dropouts in accordance with EIA/TIA-FOTP-32A.

This test solution provides a method for testing a broad variety of passive or active fiber optic components for susceptibility to discontinuities (signal dropout, transient output or transmittance fluctuations) during application of an external stimulus, such as temperature, vibration or physical shock.

Product Features

  • Single mode/Multimode capable
  • Input power range of -40dBm to -2dBm
  • Selectable dropout detection range of 0.8µs to 1s
  • Selectable loss threshold of 0.5dB to 3dB
  • Bundled OPL-DISC application that records data directly into a spreadsheet
  • USB Interface for seamless remote control
  • Support of most common connector options (FC, ST, SC, etc…)

Product Specs

OP1100
Optical Power Meter Input power range: -2dBm to -40dBm
Wavelength Range: 830nm to 1650nm
Optical Receiver 80µm InGaAs Detector
>2MHz Bandwidth
Linear amplifier output 0 to 2.5V
Discontinuity Detection Event duration: >0.8µs to 1s
Event amplitude: >= 0.5dB
Sampling interval: 0.4µs
Event trace: 1,000 samples
Data Interface USB 1.1, USB 2.0 compatible data rate and interconnect
Operating Temperature Range 0ºC to 50ºC (32ºF to 122ºF)
Optical Interface Fixed FC (others upon request)
Power Supply (order country specific) US Standard or Euro Standard
Mechanical Dimensions Standard 19” rack, 2U (16.8 x 3.8 x 10 inch)

Downloads