OP480-OP280 MTP/MPO and Ribbon Fiber Polarity Test System

Click image to enlarge
Click image to enlarge

OptoTest’s OP480MT MultiFiber Polarity Tester automates testing for broken and crossed fibers with immediate and easy-to-read results. When used in conjunction with the OP280MT Ribbon Visual Fault Locator, the OP480MT quickly  displays results for many different ribbon configurations and channel counts including type A, B, C, and Universal.  Additionally, it can be configured with a user-defined custom mapping via utility software.

Since it uses a non-contact method of testing, the OP480MT reduces the number of times a cable must be connected during production.  With fast testing time and customizable configurations, it can greatly reduce major bottlenecks in the production process. Once connected, polarity and continuity are identified almost instantaneously.

The OP480MT and OP280MT are available individually or as part of a kit—the OP-POLARITYKIT-12—which will include the OP480MT, OP280MT, launch and receive optical cables for male and female, mating adapters, cleaning tools, software, portable power pack in a carrying case.

Watch video

Click image to enlarge
Click image to enlarge

Product Features

    • Portable
    • Fully automated
    • Tests up to 12 channels in under a second
    • No physical contact during measurement
    • Works with single mode & multimode cables
    • Configurations to test multiple pinouts for 12 channel, 8 channel, and 4 channel cables, as well
      as custom channel counts and mappings
    • Charges via USB port
    • Up to 90 hours of continuous use on a single charge

Product Specs

OP480MT  
Detection Modes Manual, Auto Detect*
Auto Detected Polarities Type A,B,C, and Universal presets** plus
customizable mappings
Optical Interface MTP/MPO APC male
Internal Fiber 62.5µm
Detector Relative Sensitivity at 650nm -30dB
Compatible Source Wavelength Range 650nm to 1050nm
Internal Battery Li-ion 900mAh
Power Supply & Charge +5VDC 1A, fast charge
Communication & Charge USB 2.0, charging up to 1A
Dimensions 8.5” x 3.5” x 1.2”
Weight 1.23lbs (0.56kg)

* Auto Detect requires OP280MT with proper firmware.
** Presets supports common 12, 8, and 4 fiber population.

Downloads