MAX-Quantum is a high-end automated interferometer for inspection of single and multi-fiber connectors of MTP®/MPO, ST, FC, SC, LC, MU, E2000™ types as well as MT, MT-RJ ferrules in a single scan.
MAX-Quantum provides simultaneous end-face geometry inspection, anomalies detection and guide hole parallelism and angles measurement.
This interferometer features high optical resolution, autofocus and a large field of view with the ability to test 16 fibers per row.
FEATURES & BENEFITS
High Resolution 2D and 3D Surface Profiles
Explore surface details as small as 1.47 μm.
Minimize operator’s actions to just one click.
Combined Anomalies Detection and Geometry Testing
Speed up inspection and increase work efficiency.
Measure single fiber connector in 1.4 second and multi-fiber connector as quickly as 7 seconds.
Compatibility with Innovative Side+Front View Fixtures
Overcome cable tension and ferrule positioning uncertainties in MTP®/MPO measurement and control additional parameters – guide holes parallelism and angles.
MT16 and MT32 Inspection
Stay on top of the latest market technologies.
Store measurement data from all local sites in one place and easily integrate Sumix equipment into your manufacturing systems.
Industry-Leading MaxInspect™ Automated Inspection Software
Measure radius of curvature, apex offset, fiber height, core dip, etc.
Compliance to Industry Standards
Test per IEC, Telcordia or your own Pass/Fail criteria.
- Multi-Fiber Connectors
- Single Fiber Connectors
- Auto Focus
- PASS/FAIL Verdict
- Industry Standards
- Scratch Detection
- Fast Measurement
- Connects to Tablet or Laptop
Single and Multi-Fiber Patchcords
Mil Spec Termini
Laser Cleaved Ribbons
Cleaved Bare Fiber
Large Diameter Fiber