Manta-W+ is a revolutionary portable microscope designed for inspection of all types of single and multi-fiber optical connectors, patch cords and bulkhead, included but not limited to: MT, MPO, LC, FC, SC, CS®, E2000™, PRIZM, QSFP, ARINC, MIL Spec termini, ODC12, High-power SMA, Avim, mini-Avim and more.
Featuring resolution of a benchtop microscope, the probe gives the possibility to check multi-fiber, SMA and single fiber connectors in the field. The whole MTP®/MPO connector is tested in just one scan — as fast as 2 seconds*!
Manta-W+ can be used for visual inspection of the connector end face for scratches, defects and contamination, as well as for automatic Pass/Fail testing based on IEC standards.
*for MT12 ferrule
FEATURES & BENEFITS
Large Field of View (4.1 × 3.0 mm)
Test MTP®/MPO connectors with up to 72 fibers in just one scan, inspect entire ferrule surface including guide holes if needed. Check the whole SMA connector endface in one shot.
Detailed High-Resolution Picture
Enjoy high accuracy testing with 1.8 µm resolution and 0.75 µm defect size detection capability perfect for testing both multi-fiber and single fiber connectors.
Extremely Fast Inspection
It takes only 2 seconds to check a standard MTP®/MPO connector (12 or 16 fibers) not using autofocus and 4 seconds with autofocus.
Wide Variety of Tips
Inspect all types of single-fiber and multi-fiber optical connectors, patchcords and bulkhead, included but not limited to: MT, MPO, LC, FC, SC, E2000™, PRIZM, QSFP, ARINC, MIL-38999, ODC12, High-power SMA, Avim, mini-Avim and more.
Extended Working Distance
Get inside patch panels to test MTP®/MPO and other connectors.
Pass/Fail LED Indicator
See Pass/Fail result without looking at your tablet.
- Single Fiber
- Auto Focus
- 0.75 µm Defect Size Detection
- Industry Standards
- PASS/FAIL Verdict
- Up to 96 Fibers in One Scan
LAB OR PRODUCTION AS BENCHTOP MICROSCOPE (with a cradle)