Customized CWDM Light Sources
OptoTest’s multi-channel fiber optic light sources can be customized to provide the perfect platform for testing your WDM components for insertion loss at various wavelengths.
CWDM Light Source Solutions
OptoTest’s multichannel fiber optic light sources can be customized to provide the perfect platform for testing your WDM components for insertion loss at various wavelengths. The OP715 benchtop fiber optic light source can house 4 CWDM source wavelengths such as 1270 to 1330 for certain applications. For applications where more wavelengths are necessary, the full rack OP750 multichannel fiber optic light source can support DFB lasers for all 18 ITU G.694.2 wavelengths commonly used when testing CWDM components.
FEATURES & BENEFITS
Completely configurable to match exactly the wavelengths that need to be tested.
All sources built into a single unit with USB control to maximize space on test bench.
Calibration Not Required
Due to the wavelength stability of these sources, calibration is only necessary if defined by your processes.
MADE IN THE USA
We proudly design & manufacture our equipment in California, United States.
CWDM Component Testing
Passive Optical Lan Testing
Optical Transceiver Testing
|Laser Type||Distributed Feedback (DFB)|
|Number of Channels||Benchtop OP715: Up to 4|
19-inch OP750: Up to 24
|Benchtop OP715: Up to 2|
19-inch OP750: Up to 12
|Available Wavelengths||1271nm, 1291nm, 1311nm, 1331nm, 1351nm, 1371nm, 1391nm, 1411nm, 1431nm, 1451nm,|
1471nm, 1491nm, 1511nm, 1531nm, 1551nm, 1571nm, 1591nm, 1611nm
|Stability||0.02 dB per degC per hour|
0.05 dB per degC per 12 hours
|Peak Wavelength||± 3nm|
|Bandwidth||±3nm from nominal|
|Side-Mode Suppression Ratio||<1nm|